home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Master Hacker
/
Master_Hacker_Internet_and_Computer_Security_and_Terrorism_Core_Publishing_Group_2001.iso
/
phreaking
/
box
/
olive box.txt
< prev
next >
Wrap
Text File
|
2000-01-15
|
3KB
|
121 lines
Olive Box Plans Courtesy of Exodus
This is a relatively new box, and all it basically does is serve as a phone ringer. You have two choices for ringers, a
piezoelectric transducer (ringer), or a standard 8 ohm speaker. The speaker has a more pleasant tone to it, but either will do
fine. This circuit can also be used in conjunction with a rust box to control an external something or other when the phone rings.
Just connect the 8 ohm speaker output to the inputs on the rust box, and control the pot to tune it to light the light (which can be
replaced by a relay for external controlling) when the phone rings.
______________
| | ^
NC --|-- 5 4 --|-----/\/\/------->G
| | / R2
G<----)|----|-- 6 3 --|-- NC
| C3 | U1 |
-------|-- 7 2 --|---------- --- -- - > TO RINGER
| |
----|-- 8 1 --|--
| |______________| |
| ---/\/\/----|(----- L1
| R1 C1
------------------------------------------ L2
a. Main ringer TTL circuit
_
FROM PIN 2 < - -- --- ----------| |_| |------------->G
P1
b. Peizoelectric transducer
__ /|
FROM PIN 2 < - -- --- ---------|(---------. .-------| |/ |
>||< |S1| |
>||< --| | |
>||< | |__|\ |
G<---------.>||<.--- \|
T1
c. Elctro magnetic transducer
Parts List
U1 - Texas Instruments TCM1506
T1 - 4000:8 ohm audio transfomer
S1 - 8 ohm speaker
R1 - 2.2k resistor
R2 - External variable resistor; adjusts timing frequency
C1 - .47uF capacitor
C2 - .1uF capacitor
C3 - 10uF capacitor
L1 - Tip
L2 - Ring
L1 and L2 are the phone line.
Shift Rate:
This is the formula for determining the shift rate:
1 1
SR = --------------------- = ------------ = 6.25 Hz
(DSR(1/f1)+DSR(1/f2)) 128 128
---- + ----
1714 1500
DSR = Shift Devider Rate ratio = 128
f1 = High Output Frequency = 1714
f2 = Low Output Frequency = 1500